allow_writeable_chroot=YES local_root=/srv/ftp chroot_local_user=YES pasv_enable=YES port_enable=YES # Example config file /etc/vsftpd.conf # # The default compiled in settings are fairly paranoid. This sample file # loosens things up a bit, to make the ftp daemon more usable. # Please see vsftpd.conf.5 for all compiled in defaults. # # If you do not change anything here you will have a minimum setup for an # anonymus FTP server. # # READ THIS: This example file is NOT an exhaustive list of vsftpd options. # Please read the vsftpd.conf.5 manual page to get a full idea of vsftpd's # capabilities. # # ################ # General Settings # ################ # # Uncomment this to enable any form of FTP write command. write_enable=YES # # Activate directory messages - messages given to remote users when they # go into a certain directory. dirmessage_enable=YES # # It is recommended that you define on your system a unique user which the # ftp server can use as a totally isolated and unprivileged user. nopriv_user=ftpsecure # # You may fully customise the login banner string: #ftpd_banner=Welcome to blah FTP service. # # You may activate the "-R" option to the builtin ls. This is disabled by # default to avoid remote users being able to cause excessive I/O on large # sites. However, some broken FTP clients such as "ncftp" and "mirror" assume # the presence of the "-R" option, so there is a strong case for enabling it. #ls_recurse_enable=YES # # You may specify a file of disallowed anonymous e-mail addresses. Apparently # useful for combatting certain DoS attacks. #deny_email_enable=YES # (default follows) #banned_email_file=/etc/vsftpd.banned_emails # # If enabled, all user and group information in # directory listings will be displayed as "ftp". #hide_ids=YES # # ####################### # Local FTP user Settings # ####################### # # Uncomment this to allow local users to log in. local_enable=YES # # Default umask for local users is 077. You may wish to change this to 022, # if your users expect that (022 is used by most other ftpd's) #local_umask=022 # # You may specify an explicit list of local users to chroot() to their home # directory. If chroot_local_user is YES, then this list becomes a list of # users to NOT chroot(). #chroot_local_user=YES #chroot_list_enable=YES # (default follows) #chroot_list_file=/etc/vsftpd.chroot_list # # Performs chroot with original (non-root) credentials. This is usefull on nfs with squash_root, # where root becomes nobody and would need -x access. #allow_root_squashed_chroot=YES # # The maximum data transfer rate permitted, in bytes per second, for # local authenticated users. The default is 0 (unlimited). #local_max_rate=7200 # # ########################## # Anonymus FTP user Settings # ########################## # # Allow anonymous FTP? (Beware - allowed by default if you comment this out). anonymous_enable=NO # # The maximum data transfer rate permitted, in bytes per second, for anonymous # authenticated users. The default is 0 (unlimited). #anon_max_rate=7200 # # Anonymous users will only be allowed to download files which are # world readable. #anon_world_readable_only=YES # # Default umask for anonymus users is 077. You may wish to change this to 022, # if your users expect that (022 is used by most other ftpd's) #anon_umask=022 # # Uncomment this to allow the anonymous FTP user to upload files. This only # has an effect if the above global write enable is activated. Also, you will # obviously need to create a directory writable by the FTP user. #anon_upload_enable=YES # # Uncomment this if you want the anonymous FTP user to be able to create # new directories. #anon_mkdir_write_enable=YES # # Uncomment this to enable anonymus FTP users to perform other write operations # like deletion and renaming. #anon_other_write_enable=YES # # If you want, you can arrange for uploaded anonymous files to be owned by # a different user. Note! Using "root" for uploaded files is not # recommended! #chown_uploads=YES #chown_username=whoever # # ############ # Log Settings # ############ # # Log to the syslog daemon instead of using an logfile. syslog_enable=YES # # Uncomment this to log all FTP requests and responses. #log_ftp_protocol=YES # # Activate logging of uploads/downloads. #xferlog_enable=YES # # You may override where the log file goes if you like. The default is shown # below. # #vsftpd_log_file=/var/log/vsftpd.log # # If you want, you can have your log file in standard ftpd xferlog format. # Note that the default log file location is /var/log/xferlog in this case. #xferlog_std_format=YES # # You may override where the log file goes if you like. The default is shown # below. #xferlog_file=/var/log/vsftpd.log # # Enable this to have booth logfiles. Standard xferlog and vsftpd's own style log. #dual_log_enable=YES # # Uncomment this to enable session status information in the system process listing. #setproctitle_enable=YES # # ################# # Transfer Settings # ################# # # Make sure PORT transfer connections originate from port 20 (ftp-data). connect_from_port_20=YES # # You may change the default value for timing out an idle session. #idle_session_timeout=600 # # You may change the default value for timing out a data connection. #data_connection_timeout=120 # # Enable this and the server will recognise asynchronous ABOR requests. Not # recommended for security (the code is non-trivial). Not enabling it, # however, may confuse older FTP clients. #async_abor_enable=YES # # By default the server will pretend to allow ASCII mode but in fact ignore # the request. Turn on the below options to have the server actually do ASCII # mangling on files when in ASCII mode. # Beware that on some FTP servers, ASCII support allows a denial of service # attack (DoS) via the command "SIZE /big/file" in ASCII mode. vsftpd # predicted this attack and has always been safe, reporting the size of the # raw file. # ASCII mangling is a horrible feature of the protocol. ascii_upload_enable=YES ascii_download_enable=YES # # Set to NO if you want to disallow the PASV method of obtaining a data # connection. pasv_enable=YES # # PAM setting. Do NOT change this unless you know what you do! pam_service_name=vsftpd # # When "listen" directive is enabled, vsftpd runs in standalone mode and # listens on IPv4 sockets. This directive cannot be used in conjunction # with the listen_ipv6 directive. listen=YES # # This directive enables listening on IPv6 sockets. To listen on IPv4 and IPv6 # sockets, you must run two copies of vsftpd with two configuration files. # Make sure, that one of the listen options is commented !! listen_ipv6=NO # # Set "ssl_enable=YES" to enable SSL support and configure the location of # your local certificate (RSA, DSA, or both). Note that vsftpd won't start # if either of the "xxx_cert_file" options sets a path that doesn't exist. ssl_enable=NO rsa_cert_file= dsa_cert_file= # # Limit passive ports to this range to assis firewalling pasv_min_port=30000 pasv_max_port=30100 ### security features that are incompatible with some other settings. ### # isolate_network ensures the vsftpd subprocess is started in own network # namespace (see CLONE_NEWNET in clone(2)). It however disables the # authentication methods needs the network access (LDAP, NIS, ...). #isolate_network=NO # seccomp_sanbox add an aditional security layer limiting the number of a # syscalls can be performed via vsftpd. However it might happen that a # whitelist don't allow a legitimate call (usually indirectly triggered by # third-party library like pam, or openssl) and the process is being killed by kernel. # # Therefor if your server dies on common situations (file download, upload), # uncomment following line and don't forget to open bug at # https://bugzilla.novell.com seccomp_sandbox=NO