; ; Configuration for Shared Line Appearances (SLA). ; ; See http://wiki.asterisk.org or doc/AST.pdf for more information. ; ; ---- General Options ---------------- [general] ;attemptcallerid=no ; Attempt CallerID handling. The default value for this ; is "no" because CallerID handling with an SLA setup is ; known to not work properly in some situations. However, ; feel free to enable it if you would like. If you do, and ; you find problems, please do not report them. ; ------------------------------------- ; ******************************** ; **** Configuration Ordering **** ; ******************************** ; Note that SLA configuration processing assumes that *all* trunk declarations are ; listed in the configuration file before any stations. ; ******************************** ; ******************************** ; ---- Trunk Declarations ------------- ; ;[line1] ; Provide a name for this trunk. ;type=trunk ; This line is what marks this entry as a trunk. ;device=DAHDI/3 ; Map this trunk declaration to a specific device. ; NOTE: You can not just put any type of channel here. ; DAHDI channels can be directly used. IP trunks ; require some indirect configuration which is ; described in ; https://wiki.asterisk.org/wiki/display/AST/SLA+Trunk+Configuration ;autocontext=line1 ; This supports automatic generation of the dialplan entries ; if the autocontext option is used. Each trunk should have ; a unique context name. Then, in chan_dahdi.conf, this device ; should be configured to have incoming calls go to this context. ;ringtimeout=30 ; Set how long to allow this trunk to ring on an inbound call before hanging ; it up as an unanswered call. The value is in seconds. ;barge=no ; If this option is set to "no", then no station will be ; allowed to join a call that is in progress. The default ; value is "yes". ;hold=private ; This option configure hold permissions for this trunk. ; "open" - This means that any station can put this trunk ; on hold, and any station can retrieve it from ; hold. This is the default. ; "private" - This means that once a station puts the ; trunk on hold, no other station will be ; allowed to retrieve the call from hold. ;[line2] ;type=trunk ;device=DAHDI/4 ;autocontext=line2 ;[line3] ;type=trunk ;device=DAHDI/3 ;autocontext=line3 ;[line4] ;type=trunk ;device=Local/disa@line4_outbound ; A Local channel in combination with the Disa ; application can be used to support IP trunks. ; See https://wiki.asterisk.org/wiki/display/AST/SLA+Trunk+Configuration ;autocontext=line4 ; -------------------------------------- ; ---- Station Declarations ------------ ;[station1] ; Define a name for this station. ;type=station ; This line indicates that this entry is a station. ;device=SIP/station1 ; Each station must be mapped to a device. ;autocontext=sla_stations ; This supports automatic generation of the dialplan entries if ; the autocontext option is used. All stations can use the same ; context without conflict. The device for this station should ; have its context configured to the same one listed here. ;ringtimeout=10 ; Set a timeout for how long to allow the station to ring for an ; incoming call, in seconds. ;ringdelay=10 ; Set a time for how long to wait before beginning to ring this station ; once there is an incoming call, in seconds. ;hold=private ; This option configure hold permissions for this station. Note ; that if private hold is set in the trunk entry, that will override ; anything here. However, if a trunk has open hold access, but this ; station is set to private hold, then the private hold will be in ; effect. ; "open" - This means that once this station puts a call ; on hold, any other station is allowed to retrieve ; it. This is the default. ; "private" - This means that once this station puts a ; call on hold, no other station will be ; allowed to retrieve the call from hold. ;trunk=line1 ; Individually list all of the trunks that will appear on this station. This ; order is significant. It should be the same order as they appear on the ; phone. The order here defines the order of preference that the trunks will ; be used. ;trunk=line2 ;trunk=line3,ringdelay=5 ; A ring delay for the station can also be specified for a specific trunk. ; If a ring delay is specified both for the whole station and for a specific ; trunk on a station, the setting for the specific trunk will take priority. ; This value is in seconds. ;trunk=line4,ringtimeout=5 ; A ring timeout for the station can also be specified for a specific trunk. ; If a ring timeout is specified both for the whole station and for a specific ; trunk on a station, the setting for the specific trunk will take priority. ; This value is in seconds. ;[station](!) ; When there are a lot of stations that are configured the same way, ; it is convenient to use a configuration template like this so that ; the common settings stay in one place. ;type=station ;autocontext=sla_stations ;trunk=line1 ;trunk=line2 ;trunk=line3 ;trunk=line4 ;[station2](station) ; Define a station that uses the configuration from the template "station". ;device=SIP/station2 ; ;[station3](station) ;device=SIP/station3 ; ;[station4](station) ;device=SIP/station4 ; ;[station5](station) ;device=SIP/station5 ; --------------------------------------